Surf Pass C 712 is a new generation, environmentally friendly conversion coating that replaces classic Chromating for Aluminium alloys and Zinc alloys. It is suitable for producing a yellow - golden conversion coating that improves the paint adhesion as well as the anticorrosion properties when painted with powder and liquid paints.Surf Pass C 712 is based on Mo complex salts and shows lower toxicity than chrome-free products based on Ti, Zr and Silanes.Surf Pass C 712 gives conversion coating’s weight (0.2-0.8 gr/m²) and color similar to Chromating. The recommended coating’s weight is 0.25-0.35 gr/m2.

M Coat is a new generation, environmentally friendly conversion coating suitable for Steel H. D. Galvanized Steel, Stainless Steel 4xx series & Aluminium alloys, replacing classic Phosphating & Chromating procedures.M Coat generates a colored Nanoceramic coating on the surfaces of mix metals.

The Surf Pass Ti NOC is Passivation free of Chromium, Phosphorus and Nitrates for aluminum and its alloys.The complexes created on the pretreated surfaces provide excellent anti-corrosion protection and adhesion to the coating. It is based on Fluorotitanic acid, it is suitable for spraying.The coating of passivation is colorless.Before using the Surf Pass Ti NOC, aluminum surfaces must be degreased and etched according to the specifications and requirements of Qualicoat and GSB International.

Ecoclean AL is a liquid low alkalinity degreasing suitable for Aluminium and its alloys. It’s free of Borates – Phosphates and Silicate salts. The composition of the product and also the choosing of the organic compounds are biodegradable higher than 648/EC/2004, the product is included to eco-friendly alternative products.

Its a liquid acid cleaner-deoxidizer which is used by immersion and spray plants, prior to further treatment such as alkaline or acid etching.

DAL SP removes oils, lubricants and metal oxides from aluminum surfaces. It prepares the surfaces ideally to further treatment.

EcoClean AL Plus is a liquid Alkaline degreasing for all metals, especially for aluminum (2xxx, 6xxx, 7xxx) and high concentration silicon alloys, removes oil, grease and dirt. New generation biodegradable product, free of borate and phosphate salts, creates hydrophilic surfaces without attacking Aluminum.

DAL PF is a liquid acid cleaner-deoxidizer which is used by immersion and spray plants, prior to further treatment such as Chromating and chrome free finishing.

DAL PF removes oils, lubricants and metal oxides from aluminium surfaces. It prepares the surfaces ideally to further treatment such as Chromating and Chrome free finishing.

Strong Alkaline KOH based product suitable for uniform etching - Degreasing for Aluminium and its alloys. The composition of the product prevent the deposition of reaction products on the walls of the bath, the heat exchangers and the Spray nozzles. The choice of surfactants of non-ionic and amphoteric systems was stricter criteria of EC 648/2004

It's a liquid alkaline cleaner – etchant which is used by immersion and spray plants, prior to further treatment such as chromating and chrome free coatings.

ALOCLEAN SP is a liquid alkaline etchant which is used by immersion and spray plants, prior to further treatment such as chromating and chrome free coatings.

ALOX SP is a liquid acid deoxidizer which is used by immersion and spray plants, prior to further treatment such as Chromating and chrome free finishing.Minimizes the creation of deposits on heat exchange systems, as well on the surfaces of the installation.ALOX SP removes metal oxides and alkaline etching coating from aluminium surfaces. It prepares the surfaces ideally to further treatment such as Chromating and chrome free finishing.

Desmutters - Deoxidizers for Aerospace alloys (2024 T3 etc)

ALOCHROM L is a high concentrated liquid that produces golden conversion coatings on aluminum and its alloys, according to DIN 50939 and MIL-C 5541 B, prior to powder coatings.

ALOCHROM B is a high quality liquid that produces golden conversion coatings on aluminium and its alloys, according to DIN 50939 and MIL-C 5541 B, prior to powder coatings.

It is a product free of methylene chloride, phenols and cresols. It dissolves the polyester powder coatings quickly, leaving no trace of them, making aluminum profiles, parts and metal objects ready to be reworked.